HOMESITE MAP
 

Bell Securitech Pvt. Ltd.

Delivers Multi-sized Disciplined and Managed Solutions

Offers Integrated Security Systems with Cost Effective Solutions

Provides Managed Security Services, Risk Management & Continuity planning

SOLUTIONS OVERVIEW

Pacom Products

16-door controller with integrated alarms (1058)

  • Configure up to 16 doors
  • 1000 cardholders (expandable to 10,000)
  • 8 on-board supervised alarm inputs(expandable to 256) 4 on-board relay control outputs (expandable to 64)
  • 32 partitioned alarm areas
  • Support for over 65,000 facility codes
  • Unlimited access levels
  • Offline storage of 1000 transactions (expandable to 128,000)
  • On-board Ethernet port for IP network connectivity
  • Built-in modem for dial-backup or dial-out to central station (CID, SIA)
  • Dual fl ash ROM enabling two versions of software to be stored and (remote) software downloads to be performed without interrupting system operation
  • Connect up to 16 alarm keypads
  • Peer-to-peer communication between Control Panels
  • Integrated Elevator Control for 16 elevators and 128 floors
  • 1 x RS-485 device line (expandable to 2)
  • Supports a total of 64 Pacom devices
  • Ability to confi gure a redundant RS-485 device loop
  • Downloadable software upgrades
  • Supports BACNet and Modbus
  • Support for DHCP which simplifi es programming by automatically assigning an IP address
  • National Institute of Standards and Technology (NIST) approved encryption for IP communication
  • Interfaces with Recognition Source's 'Wyreless' product range


64-door controller with integrated alarms (1057)

  • figure up to 64 doors
  • 10,000 cardholders (expandable to 256,000)
  • 32 partitioned alarm areas
  • Support for over 65,000 facility codes
  • Unlimited access levels
  • Offl ine storage of 5000 transactions (expandable to 128,000)
  • On-board Ethernet port for IP network connectivity
  • Built-in modem for dial-backup or dial-out to central station (CID, SIA)
  • Dual fl ash ROM enabling two versions of software to be stored and (remote) software downloads to be performed without interrupting system operation
  • Connect up to 16 alarm keypads
  • Peer-to-peer communication between Control Panels
  • Integrated Elevator Control for 64 elevators and 128 fl oors
  • 4 x RS-485 device lines (expandable to 6)
  • Supports a total of 192 Pacom devices
  • Ability to confi gure multiple redundant RS-485 device loops
  • Downloadable software upgrades
  • Supports BACNet and Modbus
  • Support for DHCP which simplifi es programming by automatically assigning an IP address
  • National Institute of Standards and Technology (NIST) approved encryption for IP communication
  • Interfaces with Recognition Source's 'Wyreless' product range


Single Card Reader Interface (1064)

  • Supports most card readers and most card formats
  • Support for Wiegand cards up to 64 bits
  • 4 on-board supervised alarm inputs (Door Status, Request-to-Exit, 2 auxiliary)
  • Strike control relay output
  • On-board sonalert (for local alarm annunciation)
  • Intelligent offl ine mode enabling storage of either:
    - last 256 valid cards (with facility code) or
    - last 256 valid facility codes (of any card number)
  • Support for up to 5 different card formats simultaneously (including confi gurable Wiegand format and parity)
  • Connect analog devices to measure temperature and voltage data
  • Storage of 256 offline transactions
  • Also reads 'pulsed' inputs
  • Downloadable firmware


Dual Card Reader Interface (1067)

  • Supports most card readers and most card formats
  • Support for Wiegand cards up to 64 bits
  • Support for up to 5 different card formats simultaneously (including configurable Wiegand format and parity)
  • Independent strike relay outputs
  • Each reader port provides four EOL supervised alarm inputs (door status, request-to-exit, strike monitor and one spare)
  • Two spare open collector outputs
  • Intelligent offl ine mode enabling storage of either:
    - last 1000 valid cards (with facility code) or
    - last 1000 valid facility codes (of any card number)
  • Storage of 500 offl ine transactions per reader

 

Input & Output Expansion devices

 

 

I/O Expansion Panel (1065)

  • 2 on-board expansion ports (for Pacom I/O mezzanine cards)
  • 16 on-board supervised alarm inputs (expandable to 48 with 2 x input mezzanine cards)
  • 4 on-board outputs (expandable to 20 with 2 x output mezzanine cards)
  • Communicates via RS-485 to the Pacom field controller
  • Connect analog devices to read temperature & voltage data


16-input Mezzanine Expansion Card (1050-004)

  • 16 supervised inputs
  • Input contacts can be Normally Open or Normally Closed
  • Can be plugged directly into the 1058, 1057 and 1065 Control Panels


8-output Mezzanine Expansion Card (1050-003)

  • 8 relay outputs
  • Contacts can be confi gured Normally Open or Normally Closed
  • Can be plugged directly into the 1058, 1057 and 1065 Control Panels



Keypads

Standard LCD Keypad (1062)

  • Control and display the status of up to 8 alarm areas/zones
  • Back-lit 2 line x 16 character Liquid Crystal Display (LCD) with adjustable intensity
  • 4 on-board alarm inputs (2 of these support analog devices)
  • 4 on-board control outputs
  • Built-in card reader interface
  • Usable as access control entry device
  • Supports connections for door strike, door contacts and egress button as well external indicators and buzzer if required
  • Support for up to 5 different card formats simultaneously (including confi gurable Wiegand format and parity)
  • Smart power-save mode
  • Programmable customer messages and banner
  • Built-in device tamper switch

Wide LCD Keypad (1061)

  • Control and display the status of up to 8 alarm areas/zones
  • Back-lit 2 line x 40 character Liquid Crystal Display (LCD)
  • 2 on-board alarm inputs
  • 4 on-board control outputs
  • Usable as access control PIN Pad
  • Smart power-save mode
  • Programmable customer messages and banner
  • Built-in device tamper switch



Alarm Receiver Hardware

Base Station

  • The Base Station is an alarm gathering and routing unit which collects data from all Pacom Control Panels via the data and/or telephone network and passes it to the GMS workstations, logging printers, third party monitoring centers and other peripherals
  • Includes:
    - dual hot-standby redundant CPU cards that process all alarm traffic
    - multiple Central Communication Unit (CCU) cards for every 200 Control Panels (network or dialup)
    - power supply
  • Typically required for enterprise-wide applications with many alarm/access control events requiring increased system redundancy

Stand-alone Base Station (TransIT)

  • Collects data from up to 100 Pacom Control Panels via the data and/or telephone network and passes it to the GMS Serverand/or third party monitoring centers
  • Control Panels can connect to the TransIT via multiple LAN/WAN communication protocols (IP Ethernet, IP Token Ring, Multi-drop RS-485, X.25, Serial RS-232, LLC2) and by dialup modem via PSTN or GSM
  • Two on-board Ethernet ports provide a convenient connection to the fi eld controllers on the LAN/WAN
  • Perform broadcast fi rmware downloads from the TransIT to Control Panels



Miscellaneous Devices

Elevator Controller (1065EC)

  • monitor up to 16 consecutive fl oors per 1065EC
  • connect additional 1065ECs for elevators with more than 16 fl oors
  • conveniently add up to two (2) mezzanine output cards to each 1065EC
  • RS485 controller relay with bypass function.
  • Self test

Card Enrolment Reader

  • Connects directly to a serial port on the GMS server/workstation
  • Eases the task of enrolling large numbers of cards
  • Enroll cards directly into the GMS access control database
  • In a few seconds, operators can add a cardholder’s name, assign the access permissions and then present a card to the enrolment reader - quick and simple!
  • Two models available:
    - built-in HID Proximity Reader
    - no reader (mount your own to the top of the enclosure)

Inovonics Wireless Interface Module (1068-INOV)

  • Enables wireless integration and alarm management
  • Support for Inovonics Frequency Agile (FA) Receivers
  • RS485 communication with Pacom Control Panels
  • Transmitters can be programmed via Pacom keypad or GMS software
  • View transmitter status on keypad (signal, tamper, etc.)
  • Can report battery low alarms
    Note: EchoStream (ES) Receivers can connect directly to any Pacom Control Panel (subject to a licence option) without requiring the Inovonics Wireless Interface Module

RS-485 Expansion Card (Star Coupler)

  • Mezzanine card plugs directly into the 1058 or 1057 Control Panel or 1065 I/O Expansion Panel
  • Enables star connection of RS-485 devices
  • Increases the total number of RS485 devices by 32
  • 8 separate device loops.
  • Unused loops do not need to be terminated
 

Home :: About Us :: Security Solutions :: Pacom Solutions :: Employment :: Site Map :: Contact

Best view resolution 1024 x 768

Powered by WebShree